Step 1 Inspect the expiration date on the Intercept® collection device packaging and open the outer packaging containing the collection pad and the specimen vial. Place the specimen vial on a flat surface in view of the donor. Instruct the donor to remove the handle and remove the collection device from the packaging sleeve.
Step 2 Instruct the donor to place the collection pad between the lower cheek and gums and gently rub the pad back and forth along the gum line until the pad is moist.
Step 3 Once moist, leave collection pad between cheek and gums for a full two (2) minutes.
Step 4 After 2 minutes, have the donor open the specimen vial in an upright position, with the tip pointed downward, by gently rocking the cap back and forth to avoid spilling the contents. Instruct the donor to push the collection pad into the specimen vial as far as it will go.
Step 5 Instruct the donor to snap the collection wand at the scored line against the side of the vial. Instruct the donor to not tilt the vial or spill the fluid inside.
Step 6 Instruct the donor to place the cap onto the vial until it snaps, ensuring a secure fit.
Step 7 Instruct donor to place tamper evident seal across the top of the specimen vial and down the sides, date and initial.


Watch Video


Click here to view a larger version (55MB)
(Recommended for Broadband Connections Only)